58
Caution: During assembling, ensure that earth plates are
bended flat against the Main P.C.B. properly when inserted
to locators.
9.17. Replacement of Regulator IC
(IC4200)
• Refer to “Disassembly of Main P.C.B.”.
9.17.1.
Disassembly of Regulator IC
(IC4200)
Step 1 Desolder pins of the Regulator IC (IC4200) on the sol-
der side of Main P.C.B..
Step 2 Remove 1 screw.
Step 3 Remove the Regulator IC (IC4200) from the Main
P.C.B..
Caution: Avoid touching the Heatsink due to its high tem-
perature after prolong use. Touching it may lead to inju-
ries.
9.17.2.
Assembly of Regulator IC (IC4200)
Step 1 Apply grease to the Heatsink.
Step 2 Install the Regulator IC (IC4200) to the Main P.C.B..
Caution: Ensure pins of the Regulator IC (IC4200) are prop-
erly inserted into Main P.C.B..
Step 3 Screw the Regulator IC (IC4200) to the Heatsink.
Caution: Ensure the Regulator IC (IC4200) is tightly
screwed to the Heatsink.
Summary of Contents for SA-VKX80GA
