Panasonic SA-VK61, Service Manual

Page: 3 / 156

14 Self-Diagnosis Function 24
14.1. Automatic Displayed Error Codes 24
14.2. Memorized Error Codes 24
14.3. Mode Table 1 24
14.4. DVD/CD Self-Diagnosis Error Code Description 25
14.5. Error Codes Stored During No Play 25
14.6. Mode Table 2 25
14.7. Tray Lock Function 28
14.8. Things to Do After Repair 28
15 Cautions To Be Taken During Servicing 29
15.1. Recovery after the dvd player is repaired 29
15.2. DVD Player Firmware Version Upgrade Process 29
15.3. Firmware Version Upgrade Process by Using Disc and
Recovery Process 29
15.4. Using Recovery Disc 29
15.5. Total Usage Time Display 30
16 Disassembly and Assembly of Main Component 31
16.1. Disassembly flow chart 31
16.2. Disassembly of Top Cabinet 32
16.3. Disassembly of DVD Module (2) P.C.B. 32
16.4. Disassembly for the Top Ornament Unit 32
16.5. Disassembly for DVD changer unit 34
16.6. Disassembly for Panel P.C.B., LED P.C.B. & Tact Switch
P.C.B. 34
16.7. Disassembly of Main P.C.B., Power P.C.B. & Transformer
P.C.B. 35
16.8. DVD Changer Unit Main Component Replacement
Procedures 37
16.9. Disassembly of Deck Mechanism Unit 50
16.10. Replacement for the cassette lid ass 馳 54
16.11. Counter-measure for tape trouble 55
17 Measurements and Adjustments 56
17.1. Cassette Deck Section 56
17.2. Tuner Section 57
17.3. Alignment Points 58
18 Block Diagram 59
19 Schematic Diagram 69
19.1. (A) DVD Module (1) Circuit 70
19.2. (B) DVD Module (2) Circuit 72
19.3. (C) Main Circuit & (D) Tuner Extent Circuit 83
19.4. (E) Panel Circuit, (F) LED Circuit & (G) Tact Switch Circuit
95
19.5. (H) Tuner Circuit 99
19.6. (J) Deck Circuit & (K) Deck Mechanism Circuit 101
19.7. (L) Power Supply Circuit 103
19.8. (M) Power Circuit 105
19.9. (N) Transformer Circuit, (O) AC Inlet Circuit, (Q) CD
Loading Circuit, (R) CD Detect Circuit & (S) Spindle
Position Circuit 107
20 Printed Circuit Board 108
20.1. (A) DVD Module (1) P.C.B. (Component & Foil Side) 108
20.2. (B) DVD Module (2) P.C.B. (Side A & B) 109
20.3. (C) Main P.C.B. 113
20.4. (D) Tuner Extent P.C.B., (F) LED P.C.B. & (G) Tact P.C.B.
115
20.5. (E) Panel P.C.B. 116
20.6. (H) Tuner P.C.B. 118
20.7. (J) Deck P.C.B. & (K) Deck Mechanism P.C.B. 119
20.8. (L) Power Supply P.C.B. 120
20.9. (M) Power P.C.B. 122
20.10. (N) Transformer P.C.B. 124
20.11. (O) AC Inlet P.C.B. 125
20.12. (Q) CD Loading P.C.B., (R) CD Detect P.C.B. & (S)
Spindle Position P.C.B. 126
21 Wiring Connection Diagram 127
22 Illustration of ICs, Transistors and Diodes 129
23 Terminal Function of IC 130
23.1. IC600 (C2BBHF000077
) System Microprocessor
130
24 Parts Location and Replacement Parts List 131
24.1. Deck Mechanism (RAA3412-S) 132
24.2. CD Loading Mechanism (RD-DAC036-S) 135
24.3. Cabinet 139
24.4. Electrical Parts List 142
24.5. Packing Materials & Accessories Parts List 155
24.6. Packaging 156
1 Before Repair and Adjustment
Disconnect AC power, discharge Power Supply Capacitors C531~C534, C588~C589, C598~C599 and C954 through a 10
Ω
, 5W
resistor to ground.
DO NOT SHORT-CIRCUIT DIRECTLY (with a screwdriver blade, for instance), as this may destroy solid state devices.
After repairs are completed, restore power gradually using a variac, to avoid overcurrent.
Current consumption at AC 230~240 V, 50 Hz in NO SIGNAL should be ~770mA (at volume min, in CD mode).
2 Protection Circuitry
The protection circuitry may have operated if either of the following conditions are noticed:
·
No sound is heard when the power is turned on.
3
SA-VK61DEE