Step 2
Raise the mecha chassis vertically.
Step 3
Slide the lever in the arrow direction till it stops and pull
the tray out.
Step 4
Spread the tabs at the both sides and pull the tray out.
(The tray slides a little forword and stops.).
Step 5
Remove the drive arm concave phase from the tray
slider and tray.
l
(Assembly of the tray unit)
Step 1
Insert a part of the tray into the unit sliding over the
groove on the mecha chassis.
Step 2
Insert the tray to the point before the tab of the
mecha chassis.
Step 3
Hook the drive arm concave phase over the tray and
the tray slider.
Step 4
Press in the tray.
Step 5
Make sure that the tray and the drive arm move
smoothly.
52
SA-PT550E / SA-PT550EB / SA-PT550EG
Summary of Contents for SA-PT550E
