Panasonic SA-PT464P, Service Manual

Page: 32 / 152

32
6.3.3. Power Supply & Digital Amplifier Error Code Table
6.3.4. iPod Error Code Table
Error
Code
F61 The abnormalities In normal operation, when DCDET2 goes Press [ STOP] on main
in an output or power to "L" (Low) (Not during POWER OFF unit for next error.
supply circuit of condition), F61 appears on FLDisplay
POWER AMP for 1 second and PCONT goes to
"L" (Low).This is due to speaker output
has DC voltage or fan is not working.
F76 Abnormality in the In normal operation when DCDET1 is Press [ STOP] on main
output voltage of detected "L" (Low) for two consecutive unit for next error.
stabilized power times, F76 is displayed on FL for
supply 1 second and after that PCONT will be
turned to "L" (Low). This is due to any of
the DC voltages (+9V, +7V, -7V, +5V,
+5.3V etc.) not available.
Diagnosis Contents Description of error Automatic FL Display Remarks
Error
Code
Over current occurs in
power supply for iPod
charging In normal operation when IPOD_OC is
detected L (Low) for two consecutive
times) the message will display on FL
once and power supply to iPod shall be cut.
This error shall be displayed as "IPOD OC"
when checking occurred error messages
during self diagnostic.
IPOD OVER
CURRENT ERROR
(scrolling)
Switch to DVD/CD mode,
remove iPod and turn off
the unit. This is later follow
by turning on the unit.
Diagnosis Contents Description of error Automatic FL Display Remarks