Panasonic SA-PT150GC Service Manual Download Page 44

Page: 44 / 107

Step 2

Remove 1 screw from the regulator IC (IC2903).

Step 3

Remove the regulator IC (IC2903) from the heatsink

extrusion.

Caution :

Handle the heatsink extrusion with caution due to its

high prolonged use. Touching it may lead to injuries.

Note :

Refer to the diagrams of Main P.C.B. (Item 9.14.) for the

location of the part.

9.17. Disassembly of SMPS Module

P.C.B.

Follow (Step 1) to (Step 3) of Item 9.3.

Caution Note: The SMPS Module P.C.B. is advisable to be
replaced as a unit. Do not attempt to replace any individual
components on board.

Step 1

Remove 4 screws from SMPS Module P.C.B.

Step 2

Detach FFC cable from the connectors (CN2 & CN3) on

SMPS Module P.C.B.

Step 3

Remove 1 screw from the rear panel.

Step 4

Release tab of the rear panel in the direction of arrow.

Step 5

Remove SMPS Module P.C.B.

SA-PT150GC / SA-PT150GCP / SA-PT150GCS / SA-PT150GCT / SA-PT150GS

Summary of Contents for SA-PT150GC












































































































Search results

Summary of Contents for SA-PT150GC

Reviews:

Related manuals for SA-PT150GC

Brands by name

Popular brands

Panasonic SA-PT150GC, Service Manual

Search results

Summary of Contents for SA-PT150GC

Reviews:

Related manuals for SA-PT150GC

Brands by name

Popular brands