Panasonic SA-PM9 Operating Instructions Manual Download Page 5

Before use

5

RQT7360

Connections

2

Connect the AM loop antenna.

After attaching the antenna, turn on the system and tune in
a broadcast station. Put the antenna where the reception
is best and interference is minimal.

3

Connect the speaker cables.

Connect the speaker cords without tags to the black
terminals, so (+) and (–) are correct.
Connect the speaker cords with red tags to the red
terminals, so (+) and (–) are correct.
Never allow the exposed wires to contact each other when
connected.

Incorrect connection can damage the unit.

Caution

Use only the supplied speakers.

The combination of the main unit and speakers provide the
best sound. Using other speakers can damage the unit and
sound quality will be negatively affected.

Caution
• Use the speakers only with the recommended

system.
Failure to do so may lead to damage to the amplifier
and/or the speakers, and may result in the risk of
fire. Consult a qualified service person if damage has
occurred or if you experience a sudden change in
performance.

• Do not attach these speakers to walls or ceilings.

4

Connect the AC mains lead.

FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS LEAD ON
PAGE 3 BEFORE CONNECTION.

Insertion of Connector

Even when the connector is perfectly inserted, depending
on the type of inlet used, the front part of the connector
may jut out as shown in the drawing.

However there is no problem using the unit.

Appliance inlet

Connector

Approx. 3.5 mm

  

 Note

The included AC mains lead is for use with this unit only.  Do
not use it with other equipment.

Optional antenna connections

You may need an outdoor antenna if you use this system in a
mountainous region or inside a reinforced-concrete building, etc.

A

FM outdoor antenna

Disconnect the FM indoor antenna if an FM outdoor antenna is
installed.

Note

An outdoor antenna should be installed by a qualified technician
only.

B

AM outdoor antenna

Connect the outdoor antenna without removing the AM loop
antenna. Run 5 to 12 m of vinyl-covered wire horizontally along
a window or other convenient location.

Note

When the unit is not in use, disconnect the outdoor antenna to
prevent possible damage that may be caused by lightning.
Never use an outdoor antenna during a lightning storm.

2

AM loop antenna

AM ANT

EXT

FM ANT

75

LOOP

1

2

3

L

R

(SB-PM9)

1

2

3

Red (     )

Copper

(    ) 

Red tag

Silver (    )

Black (     )

Black (     )

Red (     )

A

AM ANT

EXT

FM ANT

75

LOOP

FM outdoor antenna
(not included)

75    coaxial cable
(not included)

(Only for the U.K.)

Use the antenna
plug adaptor
(included).

B

AM outdoor antenna
(not included)

5-12m

AM ANT

EXT

FM ANT

75

LOOP

RQT7360-B_04-07_EN

30/12/03, 2:47 pm

5

Summary of Contents for SA-PM9

























Reviews: