32
9 Service Position
Note: For description of the disassembly procedures, refer
Section 8 of the Service Manual.
9.1.
Checking of Panel P.C.B.
Step 1 Remove Top Cabinet.
Step 2 Remove Front Panel Unit.
Step 3 Remove Panel P.C.B..
Step 4 Place Panel P.C.B. on the insulated material as shown.
Step 5 Attach 2P Cable at connector (P8502) on Main P.C.B..
Step 6 Attach 30P FFC at connector (P1802) on Main P.C.B..
Step 7 Attach 12P FFC at connector (P1804) on Main P.C.B..
Step 8 Attach 12P Cable at connector (P9001) on Main P.C.B..
Step 9 Attach 9P Cable at connector (P1803) on Main P.C.B..
Step 10 Panel P.C.B. can be checked as diagram shown.
9.2.
Checking of SMPS P.C.B.
Step 1 Remove Top Cabinet.
Step 2 Remove Front Panel Unit.
Step 3 Remove SMPS P.C.B..
Step 4 Place SMPS P.C.B. on the insulated material as shown.
Step 5 Attach 2P Cable at connector (P8502) on Main P.C.B..
Step 6 Attach 30P FFC at connector (P1802) on Main P.C.B..
Step 7 Attach 12P FFC at connector (P1804) on Main P.C.B..
Step 8 Attach 12P Cable at connector (P9001) on Main P.C.B..
Step 9 Attach 9P Cable at connector (P1803) on Main P.C.B..
Step 10 Attach 10P Cable at connector (CN1853) on SMPS
P.C.B..
Step 11 Attach 13P Cable at connector (CN1851) on SMPS
P.C.B..
Step 12 SMPS P.C.B. can be checked as diagram shown.
Summary of Contents for SA-MAX9000GN
