1. Slide the guide tray unit while pressing the stopper in the
arrow direction, and remove the guide tray unit.
2. Raise the loading unit.
3. Slide the lever in the arrow direction till it stops and pull the
tray out.
4. Spread the tabs at the both sides and pull the tray out. (The
tray slides a little forward and stops.)
5. Remove the drive arm concave phase from the tray slider
and tray.
<Assembling the tray unit>
1. Insert a part of the tray into the unit sliding over the
groove on the mechanical chassis unit.
2. Insert the tray to the point before the tab of the
mechanical chassis unit.
13.3. Tray
19
SA-HT870E / SA-HT870EB / SA-HT870EG
Summary of Contents for SA-HT870E
