![background image](http://html.mh-extra.com/html/panasonic/sa-ht740gcp/sa-ht740gcp_service-manual_278276027.webp)
·
Recovery disc (Product number: RFKZD03R005) [SPG]
·
Performing recovery process
1. Load the recovery disc on to the player and run it.
2. Recovery is performed automatically. When it is finished, a message appears on the screen.
3. Remove the recovery disc.
4. Turn off the power.
5. Initialize the player.
9.5.2. Firmware version-up of the DVD player
·
The firmware of the DVD player may be renewed to improve the quality including operability and playability to the substandard
discs.processing to optimize the drive.
The recovery disc has also firmware version-up.
·
After version-up, recovery processing is executed automatically.
·
Part number of the recovery disc for version-up will be noticed when it is supplied.
·
Updating firmware
1. Load the recovery disc on to the player and run it.
2. Firmware version of the player is automatically checked. Appropriate message appears whenever necessary.
3. Using remote controller´s cursor key, select whether version updating is to be done or not. (Selection of Yes/No)
4. a. If Yes is selected, version updating is performed.
b. If No is selected, only recovery is performed.
5. a. When updating is finished, remove the disc according to the message appearing on the screen.
b. Remove the disc according to the message appearing on the screen.
6. Turn off the power.
Note:
If the AC power supply is shut out during version-up due to a power failure, the version-up is improperly carried out.
In such a case, replace the FLASH ROM IC and carry out the version-up again.
9.5.3. HDMI Module Reset
·
When after replacing Flash Rom IC or the HDMI Module P.C.B., FL displays error code “ DVD F897”. This means the unit is
not initialized properly and the following process needs to be carry out.
·
Procedures:
1. Press
on remote control while pressing “STOP” button on main unit.
2. FL display show “INIT”
3. While still pressing “STOP” button on main unit, press “ENTER” on remote control.
4. FL will display “DVD RESET” before FL display will change to TOC reading again.
5. Power off unit. Unplug the AC cord.
6. Power on the unit. It should be no problem. If problem persist check on the HDMI module P.C.B. or FLASH ROM IC.
27
SA-HT740GCP
Summary of Contents for SA-HT740GCP
