8
RQTC0047
≥
Do not connect through the video cassette recorder.
Due to copy guard protection, the picture may not display
properly.
≥
Turn the television off before connecting, and refer to the
television’s operating instructions.
∫
Television with a VIDEO IN terminal
∫
Television with an S-VIDEO IN terminal
∫
Television with COMPONENT VIDEO IN
terminals
S VIDEO OUT terminal
The S VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal by separating the chrominance (C) and
luminance (Y) signals. (Actual results depend on the television.)
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or progressive
output and provide a purer picture than the S VIDEO OUT
terminal. Connection using these terminals outputs the color
difference signals (P
B
/P
R
) and luminance signal (Y) separately in
order to achieve high fidelity in reproducing colors.
≥
The description of the component video input terminals depends
on the television or monitor (e.g. Y/P
B
/P
R
, Y/B-Y/R-Y, Y/C
B
/C
R
).
Connect to terminals of the same color.
Video cable
STEP
4
Video connections
P
B
P
R
Y
Please connect
directly toTV
COMPONENT VIDEO OUT
VIDEO OUT
(NTSC:480p/480i.PAL:576i)
S VIDEO OUT
VIDEO IN
Television
(not included)
Back of the
main unit
Video cable
(included)
P
B
P
R
Y
Please connect
directly toTV
COMPONENT VIDEO OUT
VIDEO OUT
(NTSC:480p/480i.PAL:576i)
S VIDEO OUT
IN
S-VIDEO
S-video cable
(not included)
Television
(not included)
Back of the
main unit
P
B
P
R
Y
Please connect
directly toTV
COMPONENT VIDEO OUT
VIDEO OUT
(NTSC:480p/480i.PAL:576i)
S VIDEO OUT
COMPONENT
VIDEO IN
P
R
P
B
Y
Television
(not included)
Video cables
(not included)
Back of the
main unit
To enjoy progressive video
Connect to the component video input terminals on a 480P
compatible television. (Video will not be displayed correctly if
connected to an incompatible television.)
≥
Select “Enable (NTSC Disc Only)” in the progressive output
setting in QUICK SETUP (
➜
page 10). Then play an NTSC
disc.
≥
When playing NTSC discs, change video output mode to
“480P” (
➜
page 19) so “PROG.” appears on the display.
All Panasonic televisions that have 480P input connectors are
compatible. Consult the manufacturer if you have another
brand of television.
[Note]
Output from this unit is interlace if you have connected to the
television through the VIDEO OUT or S VIDEO OUT terminal
or when playing PAL discs, even if “PROG.” is on the display.
V
ide
o c
onne
c
tions
RQT0047.book 8 ページ ２００４年８月４日 水曜日 午後５時４８分
