Panasonic SA-HT535EE, Service Manual

Page: 26 / 210

F880 Unsuitable task number When a message arrives from not existing task
Error Code Meaning Details
F890 A message is sent during AV task
transmission During transmission of a message to AV task
F891 Unable to transmit a message to AV
task When transmission of a message to AV task starts
F893 FROM altered
F894 EEPROM failure
F8A0 Unsuitable message command When transmission of a message to AV task starts
14.5. Mode Table 2
Following modes are available with combinations of the pressed buttons on the player and on
the remote controller unit.
Item Operational
Condition and
Key Function
Details Display To
Jitter
display While the player
is stopped and
no disc is
inserted, press
and hold down
the button
on the player
and the number
button, “5” on
the remote
controller unit.
Press “FL
DISPLAY”
button on
remote control
for next page.
Jitter display / Measures
and displays jitter.
Measurement is repeated
every second. Read error
counter starts at 0 at the
mode setting, and increased
by one as data read fails at
target block. A small defect
is allowed to correct by
retry. Any possibility is
counted as one increment.
Repetitive errors after retry
increase by two levels or
more. J
*1
___123
*2
_/ _456
*3
_AB
*4
_ /
[display1/display2] /
*1
: Jitter
display mode /
*2
: Jitter
measurement value /
*3
: Read
error counter
/ *4
: Focus
driving value
Values are shown to one
decimal place in the decimal
digit.Focus driving value is
displayed in the hexadecimal
digit.
Press
STOP
Error code
display While the player
is stopped and
no disc is
inserted, press
and hold down
the button
on the player
and the number
button, “0” on
the remote
controller unit.
Error code display /
Displays the latest error
code stored in EEPROM. DVDnn_F--- / *nn: Error history
/ *--: Error number
Automatically
exits
mode
five
26
PDF created with pdfFactory Pro trial version www.pdffactory.com