Panasonic SA-HT340EE, Service Manual

Page: 23 / 95

8.3.2. Error Code Table 2
Error
Code
Diagnosis Contents Description of error Automatic FL Display Remarks
F506 Invalid media Disc is flipped over, TOC unreadable,
incompatible disc media Press [
n
STOP] on main
unit for next error
F600 Access failure to
management information
caused by demodulation
error Operation stopped because navigation
data is not accessible caused by the
demodulation defect Press [ n STOP] on main
unit for next error
F601 Indeterminate sector ID
requested Operation stopped caused by the
request to access abnormal ID data
Press [ n STOP] on main
unit for next error
F602 Access failure to LEAD-IN
caused by demodulation
error LEAD IN data unreadable Press [ n STOP] on main
unit for next error
F603 Access failure to KEYDET
caused by demodulation
error Access failure to CSS data of disc Press [ n STOP] on main
unit for next error
F610 ODC abnormality No permission for command execution Press [ n STOP] on main
unit for next error
F611 No CRC OK for a specific
time (CD) Access failure to seek address in CD
series Press [
n
STOP] on main
unit for next error
F612 No CRC OK for a specific
time (DVD) Access failure to ID data in DVD series Press [ n STOP] on main
unit for next error
F620 Laser safeguard: high
temperature condition High temperature of the laser guide unit
(OPU unit) Press [
n
STOP] on main
unit for next error
F621 Laser safeguard: circuit
failure condition Circuitry failure of the laser guide unit
(OPU unit) Press [ n STOP] on main
unit for next error
F103 Illegal highlight Position Big possibility of disc specification
violation during highlight display Press [ n STOP] on main
unit for next error
F4FF Force initialize failure (time
out) Timeout when force initialization fails Press [ n STOP] on main
unit for next error
F700 MBX overflow When replying message to disc manager Press [
n
STOP] on main
unit for next error
F701 Message command does
not end Next message is sent before replying to
disc manager Press [ n STOP] on main
unit for next error
F702 Message command
changes Message is changed before it is sent as
a reply to disc manager Press [
n
STOP] on main
unit for next error
F880 Task number is not
appropriate Message coming from a non-existing
task Press [ n STOP] on main
unit for next error
23
SA-HT340EE