37
10.12. Disassembly of SMPS P.C.B.
and Voltage Selector P.C.B.
• Refer to “Disassembly of Top Cabinet.”.
• Refer to “Disassembly of Front Panel Unit”.
Step 1 Remove 2 screw.
Step 2 Detach the Voltage Selector P.C.B. from the Rear Panel.
Step 3 Remove 3 screws.
Step 4 Detach 13P Cable Wire at the connector (CN5802) on
SMPS P.C.B..
Step 5 Release the P.C.B. Holder..
Step 6 Remove the SMPS P.C.B..
Caution: During assembling, ensure that the SMPS P.C.B.
is seated properly onto the locators.
10.13. Disassembly of CD Mecha-
nism Unit
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.
• Refer to “Disassembly of Main P.C.B”.
Step 1 Remove 4 screws.
Summary of Contents for SA-AKX76PH
