Step 7
Attach 10P FFC at the connector (FP8251) on the Main
P.C.B..
Step 8
Attch 24P FFC at the connector (FP8201) on the Main
P.C.B..
Step 9
Attach 2P Wire at a connector (CN2007) on the Main
P.C.B..
Step 10
Attach 13P Cable at the connector (CN5802) on the
SMPS P.C.B..
Step 11
Positioned the Front Panel Unit as shown.
Step 12
Detach 30P FFC at the connector (CN2004) on the
Main P.C.B..
Step 13
Side B Main P.C.B. can be checked at diagram shown.
11.4. Checking of SMPS P.C.B.
Step 1
Remove Top Cabinet.
Step 2
Remove Front Panel Unit.
Step 3
Remove SMPS P.C.B.
Step 4
Place the Front Panel Unit as diagram shown.
Step 5
Attach 30P FFC to the connector (CN2004) on the Main
P.C.B..
Step 6
Place the SMPS P.C.B. on
the insulated material.
Step 7
Attach 13P Cable to the connector (CN5802) on the
SMPS P.C.B..
Step 8
SMPS P.C.B. can be checked as diagram shown.
Summary of Contents for SA-AKX76
