49
11.17.2. Assembly of Audio Digital Amp IC
(IC5700)
Step 1 Apply grease to the Heatsink.
Step 2 Fix the Audio Digital Amp IC (IC5700) on the Main
P.C.B.
Caution: Ensure pins of the Audio Digital Amp IC (IC5700)
are properly inserted into the Main P.C.B..
Step 3 Fix the Heatsink Clip to the Heatsink.
Caution: During assembling, ensure that the Heatsink Clip
is catched onto the Heatsink properly.
Step 4 Solder pins of the Audio Digital Amp IC (IC5700) on the
solder side of the Main P.C.B..
11.18. Disassembly of D-Amp P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Unit”.
Step 1 Remove 2 screws.
Step 2 Lift up the Wire Clamper.
Step 3 Detach 6P Cable Wire at the connector (CN5801) on
the SMPS P.C.B..
Summary of Contents for SA-AKX74PH
