18
6.2.2.
Doctor Mode Table 2
FL Display
Key Operation
Front Key
Item
Description
Mode Name
Cold Start
Volume Setting
Check
FL Display
Check
To active cold start upon next AC
power up when reset start is execute
the next time.
To check the volume setting of a main
unit.
To check the FL segment display
All segment will light up while all LED
blink at 0.5s,intervals.(if any)
In Doctor Mode:
1. Press [DISPLAY/-DIMMER]
button on remote control.
In Doctor Mode:
1. Press [7],[8],[9],
[PLAY MENU/RADIO
MENU] button on remote
control.
In Doctor mode:
1. Press [1] button on
remote control.
CD Open
Check
To excute CD Open operation.
In Doctor mode:
1. Press [DEL] button on
remote control.
Press [7]: VOL50
Press [8]: VOL35
Press [9]: VOL0
Press [PLAY/RADIO MODE]: VOL30
Volume
In this mode, the tray will open &
close.
Note: Refer to Section 6.3 Fig 1 for
process flow.
The counter will
increment by one.
When reach 9999
will change to 0000
Cancellation Display
BRS1C Reliability
Test (Loading)
To determine CD Mechanism Unit
(BRS1C) Open/Close operation.
Note: Refer to Section 6.3 Fig 2. for
process flow.
The counter will
increment by one.
When reach 9999
will change to 0000
Cancellation Display
BRS1C Reliability
Test (Traverse)
To determine CD Mechanism BRS1C
Access Inner & Outer disc operation.
Note: Refer to Section 6.3 Fig 3. for
process flow.
The counter will
increment by one.
When reach 9999
will change to 0000
Cancellation Display
BRS1C Reliability
Test
(Combination)
In this mode,ensure the CD is in the
main unit.
To determine CD Mechanism Unit
(BRS1C) Open/Close & Access Inner &
Outer Disc Operation.
In this mode,ensure the CD is in the
main unit.
In Doctor Mode:
1. Press [10] [2] [1] button
on remote control.
2. To cancel, press [0]
on remote control.
In Doctor Mode:
1. Press [10] [1] [2] button
on remote control.
2. To cancel, press [0]
on remote control.
In Doctor Mode:
1. Press [10] [1] [5] button
on remote control.
2. To cancel, press [0]
on remote control.
Summary of Contents for SA-AKX52PH
