33
9 Service Position
Note: For description of the disassembly procedures, see
the Section 8.
9.1.
Checking of Panel P.C.B. and
Main P.C.B.
Step 1 Remove Top Cabinet.
Step 2 Remove Front Panel Unit.
Step 3 Remove Panel P.C.B..
Step 4 Place Panel P.C.B. on the insulated material as shown.
Step 5 Attach 17P FFC at connector (CN2500) on Main P.C.B..
Step 6 Panel P.C.B. and Main P.C.B. can be checked as dia-
gram shown.
9.2.
Checking of SMPS Module
Step 1 Remove Top Cabinet.
Step 2 Remove Rear Panel.
Step 3 Remove SMPS Module.
Step 4 Place SMPS Module on the insulated material.
Step 5 Attach 9P Wire at connector (CON2) on SMPS Module.
Step 6 SMPS Module can be checked as diagram shown.
Summary of Contents for SA-AKX200PN
