http://servis-manual.com/
8.3 Cassette Mechanism Test (For error code
H01, H02, H03, F01, F02)
TOP
PREVIOUS
NEXT
1. Press “TAPE, DECK 1/2” to select Deck 2.
2. Load a cassette tape with the erasure prevention tab, remove from left side only and close the
cassette holder.
3. Press “FAST FORWARD MEMORY/NEXT” (Tape will be stop after 2 seconds)
4. Load a cassette tape with the erasure prevention tab, remove from right side only and close the
cassette holder.
5. Press “REVERSE FM MODE/BP/PREV” (Tape will be stop after 2 seconds)
6. Load a pre-recorded tape with both side record tabs intact and close the cassette holder.
7. Press “PLAY TUNE/TIME ADJ SELECT” (After TPS function, tape will stop automatically)
8. Press “REC/STOP” (Tape will not move)
9. Press “STOP TUNE MODE” to indicate Error code.
¡
If several problem exist, error code will change each time when “ TUNE
MODE/PBC” is pressed.
(e.g. H01
→
H03
→
F01 .....etc.)
10. Press “TAPE, DECK 1/2” to select Deck 1.
11. Repeat step 2 to 9 to test Deck 1. (Tape Deck 1 will not check H02 because of no recording
function)
TOP
PREVIOUS
NEXT
Stránka
č
. 1 z 1
20. 11. 2004
file://C:\Documents%20and%20Settings\Admin\Plocha\SCHÉMATA\VIDEA\PAN...
