• •
Measurement Condition
− −
Reverse-mode seelctor switch:
− −
Tape edit: NORMAL
− −
Record timer: OFF
− −
Make sure head, capstan and press roller are clean.
− −
Judgeable room temperature 20 ± 5 °C (68 ± 9 °F)
• •
Measuring instrument
− −
EVM (Electronic Voltmeter)
Caution:
• •
Please
replace
both
azimuth
adjustment
screws
(RHE5152ZB) and springs (RMB0331) simultaneously
when readjusting the head azimuth. (shown in Fig. 2)
Even if you wish to readjust the head azimuth without
replacing the screws and springs, a fine adjustment to
the azimuth screw and spring.
• •
Please remove the screw-locking bond left on the head
base when replacing the azimuth screw.
• •
If you wish to readjust the head azimuth, be sure to
adjust with adhering the cassette tape closely to the
mechanism by pushing the center of cassette tape with
your finger. (shown in Fig. 3)
1. Playback the azimuth adjustment portion (8 kHz, -20dB)
of the test tape (QZZCFM) in the forward play mode.
Vary the azimuth adjusting screw until the output of the
R-CH (PB OUT-R) are maximized.
2. Perform the same adjustment in the reverse play mode.
3. After the adjustment, apply screwlock to the azimuth
adjusting screw.
1. Set the tape edit button to “NORMAL” position.
2. Insert the test tape (QZZCWAT) to DECK 2 and playback
(FWD side) the middle portion of it.
3. Adjust Motor VR (DECK 2) for the output value shown
below.
Adjustment target: 2940 ~ 3060 Hz (NORMAL speed)
4. After alignment, assure that the output frequency of the
DECK 2 REV and DECK 1 FWD are within ±45 Hz and ±60
Hz respectively of the value of the output frequency of
DECK 2 FWD.
− −
Digital fre quency counter
• •
Test tape
− −
Head azimuth adjustment (8 kHz, -20 dB); QZZCFM
− −
Tape
speed
gain
adjustment
(3
kHz,
-10
dB);
QZZCWAT
− −
Playback gain adjustment (315 Hz, 0 dB); QZZCFM
− −
CrO2 tape; QZZCRX
11 Measurements and Adjustments
11.1. Cassette Deck Section
11.1.1. Head Azimuth Adjustment (Deck 1/2)
11.1.2. Tape Speed Adjustment (Deck 1/2)
11
SA-AK78
Summary of Contents for SA-AK78
