10.1. Caution
Below is the list of disassembly sections
Below shown is part no. of different screws types used:
10 Assembling and Disassembling
Special Note:
This model uses a new CD changer unit CRS1. In this following section does not contain the necessary disassembly &
assembly information for the CD changer unit (CRS1) except the disasembly & assembly of traverse unit. Kindly refer to the
original service manual for the CD changer unit. (Order No. MD0509368C0).
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation of the major printed circuit boards and replacing the main
components.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
4. Refer to the Parts No. on the page of “Parts Location and Replacement Parts List” (Section 24), if necessary.
Caution:
After replacing of CD Changer Unit, ageing test is necessary. Please confirm operation for CD Changer Unit.
·
Disassembly of Top Cabinet
·
Disassembly of Rear Panel
·
Disassembly of CD Changer Unit (CRS1)
·
Disassembly of Main P.C.B.
·
Disassembly of Transformer P.C.B.
·
Disassembly of Power P.C.B.
·
Disassembly of Front Panel Unit
·
Disassembly of Panel P.C.B.
·
Disassembly of USB P.C.B.
·
Disassembly of Tact Switch P.C.B.
·
Disassembly of Deck Mechanism Unit
·
Disassembly for Deck P.C.B.
·
Disassembly of Traverse Unit
·
Disassembly of Deck Mechanism
·
Disassembly of Deck Mechanism P.C.B.
·
Disassembly of cassette lid
·
Rectification for tape jam problem
25
SA-AK750PL
Summary of Contents for SA-AK750PL
