Panasonic SA-AK340, Operating Instructions Manual

Page: 13 / 20

13
RQT8043
RQTV0070
LANG - 5
LANG - 4
FRANÇAIS
DANSK
ENGLISH
Memory preset Memory preset
Up to 15 stations each can be set in the FM and AM bands.
Preparation
Press [TUNER, BAND] to select “FM” or “AM”.
Automatic presetting Automatic presetting
1 Tune to the frequency where pre-setting is to begin.
2 Press and hold [PROGRAM] to start presetting.
The tuner presets all the stations it can receive into the
channels in ascending order. When fi nished, the last station
memorized is tuned in.
Manual presetting Manual presetting
1
Press [PLAY MODE] to select “MANUAL”.
2
Press [
4
, REW / ] or [
¢
, / FF] to tune to the
required station.
3
Press [PROGRAM].
4
Press the numeric buttons to select a channel.
For channels 10 to 15 press [
h
10], then the two digits.
The station occupying a channel is erased if another
station is preset in that channel.
Selecting a preset station Selecting a preset station
Press the numeric buttons to select the channel.
OR
1 Press [PLAY MODE] to select “PRESET”.
2 Press [
4
, REW / ] or [
¢
, / FF] to select the
channel.
Manual tuning Manual tuning
1 Press [TUNER, BAND] to select “FM” or “AM”.
2 Press [PLAY MODE] to select “MANUAL”.
3
Press [
4
, REW / ] or [
¢
, / FF] to select the
frequency of the required station.
• “ ” is displayed when a stereo FM broadcast is being
received.
• “ TUNED ” is displayed when a radio station is tuned.
To tune automatically
Press and hold [
4
, REW / ] or [
¢
, / FF] until the
frequency starts changing rapidly. The unit begins auto
tuning, stopping when it fi nds a station.
• Auto tuning may be interrupted when there is excessive
interference.
• To cancel auto tuning, press [
4
, REW / ] or [
¢
, / FF]
once again.
To improve FM sound quality To improve FM sound quality
Press and hold [PLAY MODE] to display “MONO”.
To cancel
Press and hold [PLAY MODE] again until “MONO”
disappear.
• MONO is also canceled if the frequency is changed.
• Turn off “MONO” for normal listening.
AM allocation setting AM allocation setting
By main unit only
This system can also receive AM broadcasts allocated in
10 kHz steps.
To change the step from 9 kHz to 10 kHz
1 Press and hold [TUNER, BAND].
After a few seconds the display changes to a fl ashing
display of the current minimum frequency.
2 Continue to hold down [TUNER, BAND].
• When the minimum frequency changes, release the
button. To return to the original step, repeat the above
steps.
• After changing the setting, previously preset frequency
will be cleared.
Radio
RQTV0070-M_1EN.indd 13 RQTV0070-M_1EN.indd 13 11/16/05 2:38:30 PM 11/16/05 2:38:30 PM