Panasonic SA-AK331GCP, Service Manual, Page: 32 / 106

Step 1 Install the belt temporarily.
NOTE:
Take care not apply the grease to the belt.
Step 2 Upset the CD loading unit.
Step 3 Remove 3 screws.
Step 4 Unsolder the plunger terminals (2 points).
Step 5 Unsolder the motor terminals (2 points).
* The mechanism as shown below is for DECK1. For DECK
2, perform the same procedures.
Step 6 Release the 2 claws (A), and then remove the Motor
P.C.B.
Step 7 Release the claw (B), and then remove the motor ass’y.
[Notice for motor ass’y installation]
1. Locate the name plate of motor to the traverse ass’y.
2. Align the hole of motor with the ribs.
10.12.4. Replacement for the motor ass’y
10.13. Replacement for the pinch roller ass’y and head block
· Follow the (Step 1) - (Step 2) of Item 10.3 - Disassembly of Top Cabinet
· Follow the (Step 1) - (Step 6) of Item 10.4 - Disassembly of CD Lid
· Follow the (Step 1) - (Step 3) of Item 10.6 - Disassembly of CD Mechanism Unit
· Follow the (Step 1) - (Step 3) of Item 10.10 - Disassembly of Front Panel Unit
· Follow the (Step 1) - (Step 5) of Item 10.11 - Disassembly of Deck Mechanism Unit
32
SA-AK33 1GCP