Panasonic SA-AK240E, Service Manual, Page: 20 / 104

Error Code Diagnosis Contents Description of error Automatic FL Display Remarks
ITOP UD assembly UD Rack does not
move
to front
direction. This lead to
UD base not raise to
top position.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
IUDS UD assembly After TOP SW is
detected, UD rack
does not move into
tray 1 position.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
HOME Cam gear/gear
assembly abnormal Cam gear does not
move
to “HOME”
position under
following conditions
1.
After tray is load
to
“PLAY”
position.
2. After tray is
unload to
“STOCK” position.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
LOAD Tray drive assembly
abnormal Tray unit does not
move from “STOCK”
to “PLAY” position For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
PDRV Cam gear/gear
assembly abnormal Cam gear does not
move from “HOME” to
“PLAY” drive position. For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
UDU UD base asssembly
abnormal UD Base assembly
does
not move
upwards from tray 5 to
tray 2
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
UDD UD base asssembly
abnormal UD Base assembly
does
not move
downwards from tray
1 to tray 5.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
UD1 UD base asssembly
abnormal UD Base assembly
does not move to tray
1. For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
F1NG Fail - safe mode. (For
open/close tray
unit(s)) When the tray open
operation
is
performed, it fails to
open.
It will
automatically close all
trays after the time-out
by
the
microprocessor.
During this time when
it fails, the error code
will appear.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
20
SA-AK240E / SA-AK240EB / SA-AK240EG