Panasonic S-UM4JPQ, Technical Data Manual, Page: 14 / 38

• Indoor Units • FREE AIR CASSETTE • S-UM4JPQ
• VRF Systems • Indoor Units
11
5 Dimensional drawing & centre of gravity
5 - 1 Dimensional drawing
5
3TW2
Nr Name Description
1 Liquid pipe connection ø A flare connection
2 Gas pipe connection ø B flare connection
3 Drain pipe connection VP25 (O.D. ø32, I.D. ø25)
4 Power supply connection
5 Transmission wiring connection M5 (Inside control box)
6 Air discharge opening Note 1
7 Corner decoration cover
8 Drain house O.D. ø32 I.D. ø26
View A
NOTES
1 Location of the nameplates:
- Unit body: on the control box cover.
- Decoration panel: on the panel frame at the motor side
under the corner cover
2 When installing an optional accessory, refer to the installation drawings
- For the fresh air intake kit ... an inspection port is necessary
Drain side
Piping side
See note 3
860 - 910 (Ceiling opening)
710 (Suspension position)
See note 4
860 -
910 (C
ei
ling openi
ng)
780 (
S
us
pens
ion pos
iti
on
)
See note 4 See note 4
950
950
420
420
55 55 840
340
280
330
Hanging bolt
4 x M8-M10
50 40
204
10
850
Adj
us
tabl
e (0
-675)
21
4
165
175
12
5
35
35
55
55 840
130
1500 or
more
(Ins
ta
llati
on s
pac
e)
200 mm
or more
1500 mm
or more (*)
1500 mm
or more (*)
1500 mm
or more (*)
1500 mm
or more (*)
200 mm
or more
Ventilator
Other unit
External
surface light
1500 mm or more
2000 mm or more
4000 mm or more
Model A B
FXFQ20-50 6.35 12.7
FXFQ63 9.52 159
1
2
3
In case of using an Infrared remote control, this position will be a signal receiver.
Refer to the drawing of the infrared remote control for more detail
4 Make sure the spacing between the ceiling and the cassette is no more than 35 mm. Max ceiling opening: 910 mm.
5 When the conditions exceed 30°C and RH 80% in the ceiling or fresh air is inducted into the ceiling, an additional
insulation is required (polyethylene foam, thickness 10 mm or more.)
6
(*) In case a discharge opening is closed with the ‘sealing member’ option, the distance of 1500 mm can be reduced to 500 mm on the closed side.
Please respect the distances as shown on figure above.
300 or less
S-20,12,32,40,50,63UM4JPQ
S-20~50UM4JPQ
S-63UM4JPQ
8834-1A
3TW
Nr Name Description
1 Liquid pipe connection ø 9.52 flare connection
2 Gas pipe connection ø 15.90 flare connection
3 Drain pipe connection VP25 (O.D. ø32, I.D. ø25)
4 Power supply connection
5 Transmission wiring connection
6 Air discharge opening
7 Air suction grill
8 Corner decoration cover
9 Drain house O.D. ø32 I.D. ø26
View A
NOTES
1 Location of the nameplates:
- Unit body: on the control box cover.
- Decoration panel: on the panel frame at the motor side
under the cover corner
2 When installing an optional accessory, refer to the installation drawing
- For the fresh air intake kit ... an inspection port is necessary
Drain side
Piping side
See note 3
860 - 910 (Ceiling opening)
710 (Suspension position)
See note 4
860 - 910
(Cei
ling o
peni
ng
)
780 (Sus
pens
ion pos
iti
on)
See note 4 See note 4
950
950
420
420
55
55 840
340
280
330
Hanging bolt
4 x M8-M10
50 40
246
10
850 Adj
us
tabl
e (0-
675)
256
16
5
175
125
35 35
55
840
130
1500 or
more
(Ins
tal
lati
on s
pac
e)
200 mm
or more
1500 mm
or more (*)
1500 mm
or more (*)
1500 mm
or more (*)
200 mm
or more
Ventilator Other unit
External surface
light
1500 or more
2000 or more
4000 or more
3 In case of using an Infrared remote control, this position will be a signal receiver.
Refer to the drawing of the infrared remote control for more detail
4 Make sure the spacing between the ceiling and the cassette is no more than 35 mm. Max ceiling opening: 910 mm.
5 When the conditions exceed 30°C and RH 80% in the ceiling or fresh air is inducted into the ceiling, an additional
insulation is required (polyethylene foam, thickness 10 mm or more.)
6 Please respect the distances as shown on figure above.
(*) In case a discharge opening is closed with the ‘sealing member’ option, the distance of 1500 mm can be reduced to 500 mm on the closed side.
300 or less
1500 mm
or more (*)
55
S-80,100UM4JPQ
8894-1A
S-UM4JPQ.book Page 11 Monday, December 24, 2007 4:28 PM