background image

3

ENGLISH

 

CAUTION

INDOOR UNIT AND OUTDOOR UNIT

Do not wash the indoor unit with water, benzene, 
thinner or scouring powder.

Do not use for other purpose such as  
preservation of food.

Do not use any combustible equipment in front of 
the air

ß

 ow outlet to avoid propagate 

Þ

 re.

Do not expose directly to cold air for a long 
period.

Do not sit or step on the unit, you may 
fall down accidentally.

Do not touch the sharp aluminium 

Þ

 n, 

sharp parts may cause injury.

Do not switch ON the indoor when waxing the 

ß

 oor. After waxing, aerate the room properly 

before operating the unit.

Do not install the unit in oily and smoky areas.

Ensure drainage pipe is connected properly. 
Otherwise, leakage may occur.

Aerate the room regularly.

After long period of use, make sure the 
installation rack is not deteriorate to prevent the 
unit falls down.

REMOTE CONTROL

Do not use rechargeable (Ni-Cd) batteries.
It may damage the remote control.

Remove the batteries if the unit is not going to be 
used for a long period of time.

New batteries of the same type must be inserted 
following the polarity stated to prevent
malfunction of the remote control.

 

WARNING

POWER SUPPLY

Do not use modi

Þ

 ed cord, 

joint cord, extension cord or 
unspeci

Þ

 ed cord to prevent 

overheat and 

Þ

 re. 

Do not share the same power outlet with other 
equipment to prevent overheat and 

Þ

 re.

Do not operate with wet hands to prevent electric 
shock.

If the supply cord is damage, it must be replaced 
by the manufacturer, its service agent or similarly 
quali

Þ

 ed persons in order to avoid a hazard.

Strongly recommended to be installed with Earth 
Leakage Circuit Breaker (ELCB) or Residual 
Current Device (RCD) to prevent electric shock 
or 

Þ

 re.

This equipment must be earthed to prevent 
electrical shock or 

Þ

 re.

In case of emergency or abnormal conditions 
(burnt smell, etc), turn off the power supply, and 
please consult authorized dealer.

Prevent electric shock by switch off the power 
supply when:
- Before cleaning or servicing.
- Extended non-use.
- Abnormally strong lightning activity.

Air outlet

Air inlet

Indoor Unit

Power Supply

Outdoor Unit

Remote Control

Air inlet

F567161.indb   3

11/23/2009   10:07:36 AM

Summary of Contents for S-32NA1E5
















Reviews: