11
RQT7914
ALL-REC
[CD-DA]
Records the whole CD or selected tracks. When the tape
finishes before CD, recording and CD pauses for you to resume
recording on the opposite side.
[1]
Press [
∫
TAPE/CD] to switch to CD mode.
[2]
Press [CD REC MODE] to display “ALL-REC”.
Each time you press the button:
The display shows the tape length needed.
“C – – – –” indicates the tape needed exceeds 100 minutes.
You can still record, but some tracks may not be recorded if
the tape is not long enough.
[3]
Press [
<
DECK] to open the deck and load a
cassette with the side for recording facing up.
[4]
Press [
¥
/
;
] to start recording.
The unit rewinds the tape, records 10 seconds of silence,
and then starts recording.
To stop recording, press
[
∫
TAPE/CD]
. The CD also stops.
If a track is interrupted at the end of the side facing up,
Recording and CD pauses.
§
The unit records 10 seconds of silence, and resumes
recording from the beginning of the cut-off track.
Note:
≥
Random play and repeat play cannot be used with
“
ALL-REC
”.
1-REC
[CD-DA]
[MP3]
Records a selected track from the CD and stops.
Preparation:
Wind on the tape to where you want to start recording.
[1]
Press [
∫
TAPE/CD] to switch to CD mode.
[2]
Press [CD REC MODE] to display “1-REC”.
[3]
Turn
[TIME/PRESET TUNE
TRACK SKIP
] to
select the track you want to record.
[4]
Press [
¥
/
;
] to start recording.
CD play and recording start at the same time.
Note:
≥
Recording and CD will stop when the tape reaches its end,
even if the track has not finished.
Recording the Radio
Preparation:
To record from the beginning of the tape;
Wind on the leader tape.
To record from part or half way through the tape;
Wind on the tape to where you want to start recording.
[1]
Load a cassette with the side for recording
facing up.
[2]
Tune to the station.
[3]
Press [
¥
/
;
] to start recording.
To reduce noise when recording AM (Beat Proof function)
Remote control only
1
Press
[PLAY MODE]
while recording.
Each time you press the button:
bP1
,-.
bP2
Choose the setting with the least noise.
To
Operations
stop recording
Press
[
∫
TAPE/CD]
.
pause recording
Press
[
¥
/
;
]
.
continue recording
from another CD on
the same cassette
during pause or stop.
1
Press
[
<
CD]
and replace
the CD.
2
Press
[
¥
/
;
]
.
Press again to resume
recording.
record selected tracks
1
Do step
[1]
and
[2]
, then
program the tracks.
(
l
9)
2
Press
[
¥
/
;
]
.
skip unwanted tracks
1
Press
[
¥
/
;
]
to pause
recording. (The CD also
pauses.)
2
Turn
[TIME/PRESET TUNE
TRACK SKIP
]
so the
next track you want to record is
displayed.
3
Press
[
¥
/
;
]
to resume
recording.
To
Operations
record the track again
on the opposite side
1
Press
[
<
DECK]
, flip the
cassette, and insert it.
2
Press
[
¥
/
;
]
.
§
ALL-REC
1-REC
OFF
#
#
]
n
=====
]
n ,
=====
To
Operations
stop recording
Press
[
∫
TAPE/CD]
.
(The CD also stops.)
continue recording
from another CD
1
Press
[
<
CD]
and replace the
CD.
2
Do steps
[3]
and
[4]
.
record a track in play
1
Press
[CD REC MODE]
to
display
“1-REC”
.
2
Press
[
¥
/
;
]
.
Recording starts from the
beginning of the track and stops
when the track finishes.
To
Operations
stop recording
Press
[
∫
TAPE/CD]
.
pause recording
Press
[
¥
/
;
]
.
Press again to resume recording.
GC_GCS_RQT7914-G.book 11 ページ ２００５年３月２３日 水曜日 午後４時３７分
