3. While hold down the STOP switch and press the MODE switch at
short time.
4. Release the STOP switch.
Note:
The item 2 to 4 shown above should be operated within a second.
5. After all segment of LCD lights up, the unit is entered to Operation
Check Mode. During the Operation Check Mode, the Recording
LED is blinking.
2.2. Operation Check Method
1. Check all segment of LCD lights up.
Fig.2-1.
Fig.2-1.
2. Release the HOLD mode.
3. Check the display of LCD is displayed as shown below.
Fig.2-2.
Fig.2-2.
4