Panasonic RR-XS410 Owner'S Manual Download

Page: 88 / 88

VQT3T13

Panasonic Consumer Electronics Company, Division of Panasonic Corporation of North America

One Panasonic Way, Secaucus, New Jersey 07094

http://www.panasonic.com

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

www.panasonic.ca

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:

To assure continued compliance, follow the

attached installation instructions and use only

shielded interface cables with ferrite core when

connecting to computer or peripheral devices.

Any changes or modi

cations not expressly approved by

the party responsible for compliance could void the user’s

authority to operate this equipment.

Declaration of Conformity

Trade Name:

Panasonic

Model No.:

RR-XS410/RR-XS400

Responsible party:

Panasonic Corporation of North

America

One Panasonic Way, Secaucus, NJ

07094

Support Contact:

Panasonic Consumer Electronics

Company 1-800-211-PANA (7262)

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device

must accept any interference received, including interference

that may cause undesired operation.

THE FOLLOWING APPLIES ONLY IN CANADA.

This Class B digital apparatus complies with Canadian
ICES-003.

VQT3T13̲RR-XS410̲400-PP̲En.indd 88

2011/06/22 18:35:24

Summary of Contents for RR-XS410

























































































Search results

Summary of Contents for RR-XS410

Reviews:

Related manuals for RR-XS410

Brands by name

Popular brands

Panasonic RR-XS410, Owner'S Manual

Search results

Summary of Contents for RR-XS410

Reviews:

Related manuals for RR-XS410

Brands by name

Popular brands