VQT3T14
31
31
ENGLISH
8
Press and hold [
*
REC] for
1 second or more.
The unit enters the recording
standby.
9
Play back the external device and adjust the input/
output level.
1
To reconfigure the line input settings, press [MENU]
and follow steps
4
to
6
.
2
If the level meter swings and “
” is displayed, the
volume of the external device is too high. Adjust the
volume of the external device to the “
” range,
even if the volume is turned to the maximum.
3
Stop the external device by cue operation for the
sound source.
10
Press [
*
REC] to start recording.
11
Play the external device.
*
Read the operating instructions for the connected
device.
*
Disconnecting the audio cord during recording will stop
recording.
*
Change the line recording mode as necessary.
(
➜
page 32)
*
Recorded files by the line input are saved to the L folder.
This unit has the following synchro recording function.
This function detects the silence between tracks, etc.
and then records each track into different files, such as a
first track, second track, etc. If detecting sound from the
external device, recording starts automatically. If detecting
silence for approx. 2 seconds or more, recording is
paused. Detecting sound again will resume recording.
Synchro recording setting
• Press [
g
STOP/RETURN] to stop the unit.
1
Press [MENU].
2
Press +, – to select “LINE REC” and press
[
q
OK] to enter.
3
Press +, – to select “SYNCHRO REC” and
press [
q
OK] to enter.
4
Press +, – to select “ON
(Auto Stop)” or “ON
(Manual Stop)” and press
[
q
OK] to enter.
Auto: If silence continues for approx. 15 seconds, the
recording stops.
Manual: Even if silence continues, the recording
continues to be paused (standby) until
[
g
STOP/RETURN] is pressed.
VQT3T14̲RR-XS410̲400-E̲En.indd 31
VQT3T14̲RR-XS410̲400-E̲En.indd 31
2011/06/22 15:00:28
2011/06/22 15:00:28
