Panasonic RG-C811A Installation Instructions Manual Download Page 1

Model No. 

 

      

READ AND SAVE THESE INSTRUCTIONS

Thank you for purchasing this Panasonic product. 

Please read these instructions carefully before attempting 

to install, operate or service the Panasonic product. Please 

carefully read the “GENERAL SAFETY INFORMATION”. 

Failure to comply with instructions could result in personal 

injury or property damage. Please explain to users how to 

operate and maintain the product after installation and this 

manual should be presented to users. Please retain this 

manual for future references.

RG-C811A, RG-C811HA

Ventilating Fan

 The following symbol word panels are used to classify and describe the level of hazard, injury, and property damage 
 caused when the denotation is disregarded and improper use is performed. 

To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always 
observe the following safety precautions.

WARNING

CAUTION

Denotes a potential hazard that could result in serious injury or death.

Denotes a hazard that could result in minor injury.

Denotes a hazard that could result in property damage.

The following symbols are used to classify and describe the type of instructions to be observed.

This symbol is used to alert users not to disassemble the equipment.

This symbol is used to alert users to make sure of grounding when using the equipment with the grounding 
terminal.

This symbol is used to alert users to a specific operating procedure that must be followed in order to 
operate this unit safely.

This symbol is used to alert users to a specific operating procedure that must not be performed.

INSTALLATION INSTRUCTIONS

See page 12 for “Panasonic Warranty Sheet”.

GENERAL SAFETY INFORMATION

C8 1 1 A1 4 2 0 A

Summary of Contents for RG-C811A













Reviews: