9
TQBJ2225
Bluetooth
®
operations
You can listen to the sound from the Bluetooth
®
audio
device from this unit wirelessly.
≥
Refer to the operating instructions of the
Bluetooth
®
device for details.
Preparation
≥
Turn on the Bluetooth
®
feature of the device and
place the device near this unit.
∫
Pairing with Bluetooth
®
devices
1
Press [ ].
≥
If “Pairing” is indicated on the display, go to step 3.
2
Press and hold [
j
PAIRING] until “Pairing”
appears.
≥
This unit enters pairing mode.
Alternatively, you can set this unit to pairing mode via
this unit’s menu.
§
1
3
Select “RF-D30BT” from the Bluetooth
®
device’s
Bluetooth
®
menu.
≥
The MAC address (alpha-numerical string that is
unique to each unit) may be displayed before
“RF-D30BT” is displayed.
≥
“Connected” is indicated on the display.
4
Start playback on the Bluetooth
®
device.
§
1
To enter pairing mode via this unit’s menu
1
Press and hold [
j
MENU] for at least
2 seconds.
2
Press [
4
/
:
]
§
2
or [
3
/
9
]
§
2
to select
“Pairing” and then press [ENTER].
3
Press [
4
/
:
]
§
2
or [
3
/
9
]
§
2
to select
“Yes” and then press [ENTER].
≥
To cancel, select “No”.
§
2 Alternatively, you can turn [TUNE/SELECT] to select
menu item/setting.
∫
Connecting a paired Bluetooth
®
device
1
Press [ ].
≥
“Ready” is indicated on the display.
2
Select “RF-D30BT” from the Bluetooth
®
device’s
Bluetooth
®
menu.
≥
“Connected” is indicated on the display.
3
Start playback on the Bluetooth
®
device.
≥
Press [
1
/
;
] to pause or resume the playback.
≥
Press [
4
/
:
] or [
3
/
9
] to skip track.
≥
If prompted for the passkey, input “0000” or “1234”.
≥
You can register up to 8 devices with this unit. If a 9th
device is paired, the device that has not been used the
longest will be replaced.
≥
This unit can only be connected to one device at a time.
≥
When “Bluetooth” is selected as the source, this unit will
automatically try and connect to the last connected
Bluetooth
®
device. (“Linking” is indicated on the display
during this process.) If the connection attempt fails, try to
establish a connection again.
While a Bluetooth
®
device is connected
Press and hold [
j
PAIRING] until “Pairing” appears.
≥
Alternatively, you can disconnect a Bluetooth
®
device via
this unit’s menu as follows.
1
While a Bluetooth
®
device is connected:
Press and hold [
j
MENU] for at least
2 seconds.
2
Press [
4
/
:
]
§
3
or [
3
/
9
]
§
3
to select
“Disconnect” and then press [ENTER].
3
Press [
4
/
:
]
§
3
or [
3
/
9
]
§
3
to select “Yes”
and then press [ENTER].
(“Ready” is indicated on the display.)
≥
To cancel, select “No”.
§
3 Alternatively, you can turn [TUNE/SELECT] to select
menu item/setting.
≥
The Bluetooth
®
device will be disconnected if a different
audio source (e.g., “DAB”) is selected.
Press [DISPLAY] to show the date.
Connecting via Bluetooth
®
menu
Disconnecting a Bluetooth
®
device
Viewing available information
RF-D30BT_TQBJ2225_eng.book 9 ページ ２０２０年５月１３日 水曜日 午前１１時４４分
