7
T
Q
B
J214
1
FM radio
1
Press [SELECTOR] to select “FM”.
2
Press [AUTO TUNE] to tune to a station.
The unit stops tuning when it finds a station.
Press [AUTO TUNE] again to tune to the next station.
Manual tuning
Turn [TUNE/MENU SELECT] to tune to the required
station.
Presetting stations
You can preset up to 5 stations into the direct preset
buttons.
These direct preset buttons are preset with a default
frequency for your convenience.
1
While listening to a station, press and hold the
desired direct preset button ([1] to [5]).
2
Press [ENTER] to preset the station.
█
Listening to a preset station
Press the direct preset button ([1] to [5]) to listen to
the preset station.
Viewing available information
This unit can show the text data transmitted by the radio
data system (RDS) available in some areas, such as radio
text, programme service, programme type and date.
Press [DISPLAY].
Note:
RDS may not be available if reception is poor.
Bluetooth
®
You can connect and play an audio device wirelessly
through Bluetooth
®
.
Preparation
• Switch on the unit.
• Switch on the Bluetooth
®
feature of the device and put
the device near the system.
• Read the operating instructions of the device for details.
Pairing a device
Preparation
If this system is connected to a Bluetooth
®
device,
disconnect it (
~
8).
1
Press and hold [
].
If “Pairing” is shown, continue with step 5.
2
Press [MENU].
3
Turn [TUNE/MENU SELECT] to select “Pairing”
and then press [ENTER].
4
Turn [TUNE/MENU SELECT] to select “Yes” and
then press [ENTER].
“Pairing” is shown.
To cancel, select “No”.
5
Select “RF-D100BT” from the Bluetooth
®
menu of
the device.
If prompted for a passkey, input “0000” or “1234”.
The device connects with this system automatically
after pairing is complete.
The MAC address (example: 6C:5A:B5:B3:1D:0F)
may be shown before “RF-D100BT” is shown.
Note:
You can pair up to 8 devices with this system. If a 9th device is
paired, the device that has not been used for the longest time
will be replaced.
Connecting a device
Preparation
If this system is connected to a Bluetooth
®
device,
disconnect it (
~
8).
1
Press [
].
“Bluetooth Ready” is shown.
2
Select “RF-D100BT” from the Bluetooth
®
menu of
the device.
3
Start playback on the device.
Press [
4
/
9
] to pause or resume the playback.
Note:
• A device must be paired to connect.
• This system can only connect to one device at a time.
• When “Bluetooth” is selected as the source, this system will
automatically try to connect to the last connected device.
TQBJ2141_en.fm Page 7 Monday, May 7, 2018 10:24 AM
offset printing
