– 52 –
Chapter 3 Preparation — Tally lamp
Tally lamp
The tally lamp will flash when the camera is in the following status.
f
When there is no remaining battery (once per second)
f
The P2 card has less free space to record and the battery level is low (one time per second)
f
The P2 card has been removed while being accessed (four times per second)
f
The P2 card has no more space to record (four times per second)
f
When warnings such as a system error or recording abnormality are displayed (four times per second)
For details, refer to “Warning system” (page 214).
Rear tally lamp
Back tally lamp
Summary of Contents for PX380G-BS300
Page 9: ...Before using the camera read this chapter Chapter 1 Overview ...
Page 165: ...Details displayed on the viewfinder are described Chapter 8 Display ...
Page 213: ...Maintenance and error messages of the camera are described Chapter 11 Maintenance ...
Page 219: ...This chapter describes the specifications of this product Chapter 12 Specification ...