To perform the factory setting
After repairing, perform this operation to clear the Mechanism lock code and Lens motor lock code.
1. Set to Service Menu.
2. Press [JOYSTICK CONTROL UP/DOWN] to select item [1].
3. Press [JOYSTICK CONTROL RIGHT] to display [NO/YES] screen.
4. Press [JOYSTICK CONTROL UP/DOWN] to select [YES].
5. Press [JOYSTICK CONTROL CENTER] to end.
To reset the Cylinder elapsed time
After replacing the Cylinder unit, perform this operation to clear the Cylinder elapsed time.
1. Set to Service Menu.
2. Press [JOYSTICK CONTROL UP/DOWN] to select item [8].
3. Press [JOYSTICK CONTROL RIGHT] to display [NO/YES] screen.
4. Press [JOYSTICK CONTROL UP/DOWN] to select [YES].
5. Press [JOYSTICK CONTROL CENTER] to end.
To confirm the error, lock code, or elapsed time
1. Set to Service Menu.
2. Press [JOYSTICK CONTROL UP/DOWN] to select item [3].
3. Press [JOYSTICK CONTROL RIGHT] to display [NO/YES] screen.
4. Press [JOYSTICK CONTROL UP/DOWN] to select [YES].
5. Press [JOYSTICK CONTROL CENTER] to end.
Fig. 2-2
To exit the Service Menu
Unplug the AC Cord.
9
PV-GS80P / PV-GS83P / PV-GS85P / PV-GS80PC / PV-GS85PC
