26
26
Repeat Play
Set to see a recording over and over.
Zero Search
To quickly return to a specifi c tape counter
location.
1
2
Press STOP.
4
5
3
Continue playback, rewind, or fast
forward.
Press COUNTER
RESET at the
desired position to
reset to “0:00:00.”
• Unit goes into FF or REW mode and stops at the last
point the Counter was set to 0:00:00.
Press COUNTER RESET* during
playback to display the Counter.
• Playback repeats when tape end is reached or
unrecorded portion over 30 seconds is detected.
Press CM/ZERO in
stop mode to start
ZERO SEARCH.
1 : 23 : 45
0 : 00 : 00
Press CM/ZERO repeatedly to select skip
time in Play mode.
• No indication appears.
Commercial Skip
By pressing the CM/ZERO button in Playback
mode you can skip over 1 to 3 minutes of recorded
tape in just a few seconds.
In PLAY mode,
press
PLAY/REPEAT
on the unit to
turn “ON.”
PLAY
REPEAT ON
PLAY
REPEAT OFF
Repeat above to
turn “OFF.”
Tape Operation (continued)
DISPLAY
COUNTER
RESET
CM/ZERO
STOP
FF
PLAY
REW
PLAY/REPEAT
SELECT/SET
:CH UP
:CH DOWN
:VOL UP
:VOL DOWN
ACTION
Note
*Important: If a remote control button does not work when pressed, press the COMBO button on
the remote and try the button again.
