32
On-Screen Display (OSD)
Warning and Instruction Displays
These displays will alert you to a missed
operation or provide further instructions.
Press DISPLAY
to display or remove the overlay.
Whenever a blank section of a tape comes
up in Play mode, or when the selected
channel has no broadcast signal with the
Weak Signal Display set to “OFF” (see
When a function button is pressed (PLAY,
FF, etc.) or you change channels, the unit
mode or channel number will be displayed.
(Some station names may also appear if
0 8
ABC
REC 1 2 : 0 0PM
0 : 25
ABC
-0 : 1 2 : 3 4
SP
Function Status
Current Time
Rec Time
Remaining
(OTR mode only,
see page 12.)
Counter
Tape Speed
Channel Caption
VCR Status & Clock Display
Blue Screen Display
Channel & Function Display
OSD
PLEASE SET CLOCK BEFORE
PROGRAMMING
CHECK CASSETTE RECORD TAB
TO CANCEL TIMER REC HOLD DOWN
STOP KEY FOR APPROX 3 SEC
NO CASSETTE
PLEASE INSERT A CASSETTE
PLEASE PREPARE FOR TIMER REC
VIDEO HEADS MAY NEED CLEANING
PLEASE INSERT HEAD CLEANING
CASSETTE OR REFER TO MANUAL
END: PLAY KEY
VCR LOCK ACTIVATED
Caution
• If you attempt to set or review a Timer Recording,
or set the On-Timer and the Clock is not set...
• If you press REC, and a cassette is inserted with
no record tab...
• If you press STOP during a Timer Recording...
• If you press PLAY, FF, REW, or REC without a
cassette inserted...
• If the unit is not in Stop mode or a cassette with
record tab is not inserted two minutes before a
Timer Recording is about to begin...
• If head cleaning becomes necessary while playing
back a tape...
• If you press a function button other than STOP/EJECT
or POWER while the unit is in VCR Lock mode...
Page
8 - 11
3, 12
4
21
(See pag
e 26.)
page 25),
the screen will turn solid blue.
Channel Caption is set. See page 2 .)
6
25
12
20, 21