Panasonic PTAE3000U - HOME THEATER LCD PROJECTOR, Service Manual

Page: 6 / 81

2 Ext Option
This projector has EXT OPTION in addition to standard on-screen menus.
· There are SELF CHECK and FLICKER ADJUST for service, etc.
2.1. Procedure to enter EXT OPTION
1. When the projector is power ON, press "POWER" button on the main unit or remote control unit to display "POWER OFF"
confirmation screen.
2. Press the right-arrow " " button to select "CANCEL" in the "POWER OFF" confirmation screen.
3. On the main unit or remote control unit, press the buttons in order of up-arrow " ", down-arrow " ", up-arrow " ",
down-arrow " " and "ENTER".
(When the "ENTER" button is pressed, "EXT OPTION" menu is displayed.)
2.2. EXT OPTION Menu and Functions
· FAN FULLMODE
Setting the cooling fan motor rotation speed
− − − −
Switching ON "FAN FULLMODE", the rotation level of the fan becomes high-speed rotation (fixed). Moreover, when "FAN
FULLMODE" is ON, changing "HIGH ALTITUDE MODE" in OPTION menu becomes impossible (setting FAN FULLMODE
is given priority more than HIGH ALTITUDE MODE).
· AUTO SETUP
Setting AUTO SETUP mode
− − − −
NORMAL: To set the normal mode (the dot clock is adjusted strictly)
−
− −
−
SPECIAL: To set the special mode (the dot clock is adjusted roughly)
* Do not change the initial setting (NORMAL).
·
SELF CHECK
To enter the self-check mode
·
FLICKER ADJ
To enter the flicker adjustment mode
· OS
Setting of the reflection noise reduction filter when a component signal (except 525i, 625i, 1125/60p and 1125/50p) is inputted.
Usually set it to ON.
* Do not change the initial setting (ON).
·
HPLL
When non-standard signal of VIDEO/S-VIDEO is inputted (VTR, VHD, etc.), horizontal synchronization might be disordered
according to connected equipment. In this case, set HPLL to OFF.
2.3. Canceling EXT OPTION
Press "MENU" button on the main unit or remote control unit.
3 Self-Check Mode
This mode is used to narrow down the location of the failure.
6
PT-AE3000U / PT-AE3000E