background image

LENS CONTROL

E

NGLISH - 41

Settings

You can edit named lens memory settings.

Q

Deleting a memory setting

1. Select 

LENS MEMORY DELETE

 and press the 

ENTER

 button.

2. Select the required lens memory setting and press 

the 

ENTER

 button.

3. If you select 

ALL DELETE

, you can delete all of 

the saved lens memory settings.

4. Select 

OK

 in the confirmation screen and press the 

ENTER

 button.

Q

Changing the name of the memory 
setting

1. Select 

LENS MEMORY NAME CHANGE

 and 

press the 

ENTER

 button.

2. Select the required lens memory setting and press 

the 

ENTER

 button.

3. Rename the lens memory setting.

 

Use 

F

 

G

 

I

 

H

 to specify the location of the required 

character to enter and press the 

ENTER

 button.

4. Repeat step 2 until you finish the text line.

 

You can enter up to 16 characters.

 

Move the cursor to 

ALL DELETE

 and press the 

ENTER

 button to delete all the entered text line.

 

Press the 

DEFAULT

 button to delete the last entered 

character or indicted with the cursor in the text box.

 

To insert a character in the entered text line, move 
the cursor to the text box to select the required place 
and press 

G

 then perform step 2.

5. Select 

OK

 and press the 

ENTER

 button to set the 

entered text as a name.

You can move the frame area horizontally, such as 
aligning the right or left frame edge to the screen edge. 
Press 

I

 

H

 to move the frame.

You can move the frame area vertically, such as aligning 
the up or bottom frame edge to the screen edge. Press 

I

 

H

 to move the frame.

LENS MEMORY EDIT

NOTE:

• The option that contains no saved adjustment will not 

be displayed

• If you leave the text box empty and save, the default 

memory name will stay as a name.

H-AREA POSITION

V-AREA POSITION

Summary of Contents for PTAE3000U - HOME THEATER LCD PROJECTOR





























































Reviews: