Panasonic PT56DLX75 - 56" DLP TV, Manual, Page: 86 / 107

-56-
Color Wheel Unit
CW Sponge
Connector
Cable
Bosses
Optical Chassis
Position of Color Wheel F.P.C.
Connector Cable
Hook of Optical
Chassis CW Cover
Color
Wheel
F.P.C.
Cushion
Cushion
Place
Color Wheel
F.P.C. between
cushions.
Cushions
Reassembly Note for the Color Wheel Unit:
1) Install the Color Wheel Unit into the Optical Chassis using the 3 Bosses. Then install the CW Sponge so it covers the
Connector Cable.
Fig. P2-2
2) Pass the Connector Cable through the hook of the Optical Chassis CW Cover, then install the Optical Chassis CW Cover
with the 2 Screws (463).
Fig. P2-3
3) Hook and connect the Color Wheel F.P.C. to Connector PL3 so that the connecting terminal is facing front as shown below.
Then, hook and connect the Connector Cable to Connector PL2.
Fig. P2-4
4) Place the Sheet on the Color Wheel F.P.C. (It is not necessary to place for servicing.)
5) After installing the Color Wheel Unit, be sure to perform the "Color Wheel Index Delay" adjustment.
6) Check the white balance on the screen. If NG, perform the "White Balance" adjustment.
Sheet
Hook
PL2
PL3
Connecting terminal