Panasonic PT53TWD64J - 53" PROJECTION TV, Service Manual

Page: 7 / 44

http://servis-manual.com/
12.1 Quick entry to service mode:
TOP PREVIOUS NEXT
When minor adjustments need to be done to the electronic controls, the method for entering the
service mode without removal of the cabinet back is as follows, using the remote control:
1. Select SET-UP icon, enter “Program CH” and select CABLE mode in “Input Setup” option.
2. Select TIMER icon and set SLEEP time for 30 Min.
3. Press “OK” then VOL up to exit menus.
4. Tune to the Channel 124.
5. Adjust VOLUME to minimum (0).
6. Press VOL
←
(decrease) on receiver. Red “CHK” appears in upper corner.
To toggle between aging and service modes:
While the “CHK” is displayed on the left top corner of the CRT, pressing “OK” and “VOL”
UP on the TV simultaneously will toggle between the modes. Red “CHK” for service
modeand yellow “CHK” for aging.
7. Press POWER on the remote control to display the service adjustment modes menu, select
adjustment by pressing the VOL right/left buttons and CH up/down buttons on the remote and
OK to enter the adjustment.
Service mode menu
TOP PREVIOUS NEXT
27. 8. 2004 file://C:\Documents%20and%20Settings\Admin\Plocha\SCHÉMATA\VIDEA\PANA...