f
To set the SSID from other than the search results, select [OTHER].
f
The
[WIRELESS DETAILED SETUP]
screen (1/2) is displayed.
5) Press
asqw
to select each item, and change the setting according to the menu operation instructions.
[SSID]
Enter the same string as the SSID registered to the access point.
Can be set when the SSID on the top with the
z
mark or [OTHER] is selected in Step
4)
.
[AUTHENTICATION]
Select the user authentication method used in the network to which the projector is connected.
[OPEN]
Select this item when the authentication method of the access point
is Open System.
[SHARED]
Select this item when the authentication method of the access point
is Shared Key.
[WPA-PSK]
Select this item when the authentication method of the access point
is WPA-PSK.
[WPA2-PSK]
Select this item when the authentication method of the access point
is WPA2-PSK.
[WPA-EAP/WPA2-EAP]
Select this item when the authentication method of the access point
is WPA-EAP/WPA2-EAP.
[WPA-EAP]
Select this item when the authentication method of the access point
is WPA-EAP.
[WPA2-EAP]
Select this item when the authentication method of the access point
is WPA2-EAP.
[ENCRYPTION]
Select the encryption method used for the communication between the projector and the network.
[NONE]
Select this item to disable encryption.
It can be selected only when [AUTHENTICATION] is set to [OPEN]
or [SHARED].
[WEP]
Select this item when the encryption method is WEP.
It can be selected when [AUTHENTICATION] is set to [OPEN] or
[SHARED].
[TKIP]
Select this item when the encryption method is TKIP.
It can be selected when [AUTHENTICATION] is set to [WPA-PSK],
[WPA2-PSK], [WPA-EAP], or [WPA2-EAP].
[AES]
Select this item when you use AES for the encryption method.
It can be selected when [AUTHENTICATION] is set to [WPA-PSK],
[WPA2-PSK], [WPA-EAP], or [WPA2-EAP].
[DEFAULT KEY]
Set one of [1] to [4] as the default key.
It can be set when [AUTHENTICATION] is set to [OPEN] or [SHARED], and the encryption method is
[WEP].
[KEY1] - [KEY4]
Set WEP key to the key number selected in [DEFAULT KEY].
It can be set when [AUTHENTICATION] is set to [OPEN] or [SHARED], and the encryption method is
[WEP].
You can set a 64-bit or 128-bit WEP key. Enter five alphanumerics (10 digits for hexadecimal) for 64-
bit, or enter thirteen alphanumerics (26 digits for hexadecimal) for 128-bit.
[KEY]
Set the key.
It can be set when [AUTHENTICATION] is set to [WPA-PSK] or [WPA2-PSK].
Enter 8 to 63 ASCII characters or 64 hexadecimal digits.
[EAP]
Select the EAP set for RADIUS server.
It can be set when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or [WPA2-
EAP]. The types of EAP that can be selected are as follows.
[PEAP(MS-CHAPv2)], [PEAP(GTC)], [EAP-TTLS(MD5)], [EAP-TTLS(MS-CHAPv2)], [EAP-FAST(MS-
CHAPv2)], [EAP-FAST(GTC)]
[USER NAME]
Enter the user name in alphanumerics (excluding spaces, maximum 64 characters) for authentication.
It can be set when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or [WPA2-
EAP].
[PASSWORD]
Enter the password in alphanumerics (maximum 64 characters) for authentication.
It can be set when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or [WPA2-
EAP].
6) Press
as
to move to the next page.
f
The
[WIRELESS DETAILED SETUP]
screen (2/2) is displayed.
7) Press
asqw
to select each item, and change the setting according to the menu operation
instructions.
102 -
ENGLISH
Chapter 4 Settings - [NETWORK/USB] menu
