VIDEO IN
S-VIDEO IN
AUDIO IN 1
AUDIO IN 2 / MIC IN
AUDIO IN 3
AUDIO OUT
SERIAL IN
LAN
Power cord length
Cabinet materials
Dimensions (W × H × D)
Weight*
7
Operation noise*
2
Operating temperature
Operating humidity
Remote control unit
Power supply
Operation range*
8
Dimensions (W × H × D)
Weight
Pin jack × 1, 1.0 Vp-p, 75 ohms
Mini DIN 4-pin × 1, Y: 1.0 Vp-p; C: 0.286 Vp-p, 75 ohms
M3 (L, R) × 1, 0.5 Vrms
M3 (L, R) × 1, 0.5 Vrms
Pin jack × 2 (L/R × 1), 0.5 Vrms
M3 (L, R) × 1 (monitor out: 0 – 2.0 Vrms, variable)
D-sub 9-pin (male) × 1, for external control (RS-232C compliant)
RJ-45 × 1, for network connection, 100Base-TX/10Base-T, compliant
with PJLink™
2.0 m (6 ft 7 in)
Molded plastic
352 × 98*
5
× 279.4*
6
mm
(13-27/32 × 3-27/32*
5
× 11*
6
inches)
Approx. 3.3 kg (7.3 lbs)
35 dB (Lamp power: Normal), 29 dB (Lamp power: Eco 1 / Eco 2)
0–40 ˚C (32°– 104°F) (At altitudes less than 1400 m, High altitude mode: OFF)
0–30 ˚C (32°– 86°F) (At altitudes of 1400 m to 2000 m, High altitude mode: HIGH1)
0–30 ˚C (32°– 86°F) (At altitudes of 2000 m to 2700 m, High altitude mode: HIGH2)
10%– 80% (no condensation)
3 V DC (R03/LR03/AAA type battery × 2)
Approx. 7 m (23 ft) when operated from directly in front of the
signal receptor
44 × 105 × 19.5 mm (1-23/32 × 4-1/8 × 25/32 inches)
Approx. 63 g (2.22 oz) (including batteries)
Supplied accessories
Optional accessories
Replacement lamp unit
Replacement filter unit
Ceiling mount bracket
Ceiling mount bracket
Bracket assembly
)
1
×
(
k
c
o
l
y
ti
r
u
c
e
s
h
ti
w
d
r
o
c
r
e
w
o
P
Wireless remote control unit (× 1)
Batteries for remote control (R03/LR03/AAA type × 2)
VGA cable (× 1)
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring
and Control Software) (× 1)
ET-LAV300
ET-RFV300
ET-PKV100H (for high ceilings)
ET-PKV100S (for low ceilings)
ET-PKV101B
Early Warning Software
ET-SWA100
Weights and dimensions shown are approximate. Specifications subject to change without notice.
*1
When the Standby mode is set to Eco, network functions such as power on over the LAN network will not operate. Also, only certain com-
mands can be received for external control using the serial terminal.
*2
Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3
Only compatible with dot clock frequency of 27 MHz (pixel repetition signal)
*4
WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*5
With legs at shortest position.
*6
Include protruding parts.
*7
Average value. May differ depending on models.
*8
Operation range differs depending on environments.
COMPUTER (RGB) 2IN/ 1OUT
R, G, B
D-sub HD 15-pin (female) × 1
(input/output selectable using on-screen menu)
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms;
B, R: 0.7 Vp-p, 75 ohms;
HD/VD, SYNC: high impedance, TTL (positive/negative)
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
PT-
VX410Z
LCD Projectors
As of October 2013
3 / 1 3
SFL13M009
