Network
ENGLISH -
75
Settings
Connecting with Wired LAN
Projector settings
J
Use the LAN cable (Straight) to connect the projector with computer.
1 )
Turn on the projector and press the <MENU> button on the remote control.
2 )
Press the menu button to open the [Network] menu, and then select [Wired LAN],
3 )
and press <ENTER> button.
Set the detailed setup of [Wired LAN].
4 )
For details, see “Wired LAN” (
Æ
page 67).
Note
Please confirm with your network administrator before you connect to an existing network.
z
The following settings are set before the projector leaves the factory.
z
Computer operation
J
Connection can be made with wired LAN. However, confirm to your system administrator on network settings
before changing any settings.
Turn on the computer.
1 )
Make the network setting according to your system administrator.
2 )
If the projector settings are the default settings (
Æ
page 67), the computer can be used with the following
network settings.
IP address
192.168.10.101
Subnet mask
255.255.255.0
Default gateway
192.168.10.1
Connecting with Wireless LAN
Projector settings
J
Turn on the projector and press the <MENU> button on the remote control.
1 )
Press the menu button to open the [Network] menu, and then select [M-DIRECT], or
2 )
[USER 1] ~ [USER 3] for [WIRELESS LAN] and press <ENTER> button.
According to the network number selected in step 2, set the detailed setup of
3 )
[Wireless detailed setup].
For details, see “Wireless detailed setup” (
Æ
page 68-71).
DHCP
OFF
IP Address
192.168.10.100
Subnet Mask
255.255.255.0
Default gateway
192.168.10.1
DNS 1/DNS 2
NONE
