Panasonic PT-VW430EA, Operating Instructions Manual

Page: 95 / 100

Technical Information
ENGLISH -
95
Appendix
Mode
Display
resolution * 1
(dots)
Scanning
frequency
Dot clock
frequency
(MHz)
Picture
quality *
2
PnP* 3 Format
H (kHz) V (Hz)
PT-
VW430EA
PT-VX500EA
PT-VX501EA
D-WXGA
1 360 x 768
47.700 60.000 86.670 A A
H
56.160 72.000 100.190 A A
1 366 x 768
46.500 50.000 67.400 A A
48.360 60.000 86.670 A A
1 376 x 768 48.360 60.000 86.670 A A
1 280 x 768
47.776 59.870 79.500 AA A
60.289 74.893 102.250 AA A
68.633 84.837 117.500 AA A
55.993 69.991 94.964 AA A
57.675 72.004 97.817 AA A
1 280 x 800
49.572 59.870 83.282 AA A
41.200 50.000 68.557 AA A
49.702 59.810 83.500 AA A ○
63.980 60.020 108.000 AA A
58.289 69.975 98.858 AA A
60.044 71.995 102.795 AA A
62.790 74.928 106.492 AA A
71.553 84.879 122.498 AA A
D-SXGA 1 280 x 1 024
63.980 60.020 108.000 A A
60.276 58.069 93.067 A A
31.650 29.800 53.480 A A
D-1035i 1 920 x 1 035i 33.750 60.000 74.250 A A
D-1080i 1 920 x 1 080i
28.125 50.000 74.250 A A ○
33.750 60.000 74.250 A A ○
D-1080p 1 920 x 1 080
67.500 60.000 148.500 A A
56.250 50.000 148.500 A A
D-WXGA+ 1 440 x 900 55.935 59.887 106.500 A A
D-WSXGA+ 1 680 x 1 050 65.290 59.954 146.250 A A
D-WUXGA 1 920 x 1 200 74.038 59.950 154.000 A A
“i” added to the resolution value indicates an interlaced signal. *1 :
Picture quality is indicated by the following symbols. *2 :
AA: Maximum picture quality can be obtained.
A: Signals are converted by the image processing circuit.
Where marked "○" signals indicates in Plug and Play is compatible with EDID of projector. Unmarked signals *3 :
in Plug and Play may also be compliant if input terminals are written in the format list. Where Plug and Play
is unmarked and nothing is written in the format list, difficulties in projecting image may occur even when
computer and projector appear to have same resolution.
<COMPUTER 2 IN> terminal does not support Plug and Play.
Note
The number of display dots is 1 280 x 800 for the PT-VW430EA and 1 024 x 768 for the PT-VX500EA and
z
PT-VX501EA .
A signal with a different resolution will be projected after converting the resolution to match the projector
display.
When interlaced signals are connected, flicker may occur on the projected image.
z