3
4
2
1
5
r
Top
r
Bottom
:
Projection direction
1 Ambient luminance sensor
2 Vertical lens shift dial
Adjusts the projecting position in the vertical direction (vertical
shift).
3 Control panel (
x
page 27)
4 Horizontal lens shift dial
Adjusts the projecting position in the horizontal direction
(horizontal shift).
5 Burglar hook port
Attaches a burglar prevention cable, etc.
Attention
f
Do not block the ventilation ports (intake and exhaust) of the projector.
The components may deteriorate faster if cooling inside the projector is inhibited.
r
Control panel
1
3
4
2
5
6
2
7
8
1 Power button <
v
/
b
> (
v
Standby /
b
Power on)
Sets the projector to the state where the projector is switched
off (standby mode). Also starts projection when the power is
switched off (standby mode).
2 <VOL-> button / <VOL+> button
Adjusts the volume of the built-in speaker or audio output.
(
x
page 53)
3 <MENU> button
Displays or hides the main menu. (
x
page 59)
When the sub menu is displayed, pressing it will return to the
previous screen.
4 <ENTER> button
Determines and executes an item in the menu screen.
5 <INPUT SELECT> button
Switches the input signal to project. (
x
page 48)
6 <SHUTTER> button
Used to turn off the audio and video temporarily. (
x
page 52)
7 <AUTO SETUP> button
Used to
automatically adjust with auto setup function while
projecting the image (
x
page 53). It is also used to operate the
Memory Viewer screen.
8
asqw
buttons
Used to select the menu screen items, switch the setting or
adjust the level.
Also used to enter a password in the [SECURITY] menu or enter
characters.
ENGLISH
-
27
Chapter 1 Preparation - About your projector
