Panasonic's Daylight View Basic technology achieves sharp,
easy-to-see images by clearly reproducing the details in dark image
areas, which were previously difficult to see in brightly lit rooms.
A built-in sensor measures the ambient light, and the Daylight View
Basic function adjusts the halftone color and brightness level
according to the surrounding illumination.
The Daylight View Basic Function
Ensures Clear Images Even in Brightly Lit Rooms
Use a Whiteboard to Project Images
in Classrooms with no Screens.
Projecting onto a whiteboard normally
causes viewers to experience glare.
However, the Panasonic Whiteboard mode
reduces glare while also properly
reproducing images.
Panasonic employs a number of advanced technologies — including a
proprietary lamp drive system — that help maintain lamp performance.
This has resulted in a 5,000-hour
*1
lamp
replacement cycle. It helps saving operating
cost by providing longer usage between lamp
replacements.
The New Lamp Drive System
Enables a 5,000-hour
*1
Lamp Replacement Cycle
Momentary power outages
*3
or voltage drops
*4
can cause the projector
to shut down, interrupting the projection. The PT-ST10U equipped with
the Intelligent Power Management function
controls the power supply to cope with
power fluctuations, to enable continued
projection.
Intelligent Power Management Function Allows
Resistance to Sudden Voltage Fluctuations
*2
The noise level is as low as 29-dB
*7
. This helps your audience to keep
their attention on the discussion or on the screen images during quiet
scenes.
Quiet 29-dB
*7
Design Helps to Hold
Viewers' Attention
The ecological design of the PT-ST10U greatly reduces its
environmental impact. In Eco Standby mode, power consumption is
only 0.4 W
*5
. As examples of other environmental design features, the
uncoated cabinet uses no halogenated flame retardants, the lens uses
lead-free glass, and an Auto Off Timer switches the projector to
Standby mode when no input signal is received for a preset time. The
PT-ST10U also complies with the standards of the RoHS Directive
*6
.
Low Standby Power Consumption of
0.4 W
*5
Helps the Environment
*1 With the lamp mode in Eco mode. This value is calculated by continuously turning the lamp on for 2.5 hours and off for 0.25 hour. The lamp replacement cycle will decrease if the lamp is
turned on/off more frequently, or if it is left on for longer intervals. *2 Fluctuations may occur in the electricity power supply except the power outage. *3 Continuing 0V power supply during
several tens of milliseconds. *4 Power supply voltage reduction. Excluding momentary power outage. *5 In Eco Standby mode, network functions such as Standby On via LAN are not
available, and only certain commands can be received from RS-232C control. *6 Restriction of the use of certain Hazardous Substances. The specified toxic substances used in the electrical
and electronic equipment that is manufactured and distributed within Europe are controlled (the six substances are lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls
(PBB), and polybrominated diphenyl esters (PBDE)), and all Panasonic projectors comply with the standards of the European RoHS Directive.*7 Lamp mode : Eco
High Basic Performance, Including a 5,000-hour*
1
Lamp Replacement Cycle
PT-
ST10
U
2800 lm
XGA
2
Projection Distance
(Screen aspect ratio = 4:3)
Dimensions
JQA-0443
PT-ST10U1 Printed in Japan.
All information included here is valid as of August 2010.
http://panasonic.net/avc/projector
For more information about Panasonic projectors
Lens
Lamp
Screen size (diagonal)
Brightness
Center-to-corner uniformity
Contrast
Resolution
Optical axis shift
Installation
Built-in speaker
Cabinet material
Dimensions (W x H x D)
Weight
Operation environment
Supplied accessories
Power supply
RGB
YP
B
P
R
/ YC
B
C
R
S-Video/ Video
COMPUTER 1 IN
COMPUTER 2 IN
VIDEO IN
S-VIDEO IN
AUDIO IN
VARIABLE AUDIO OUT
SERIAL
LAN
Panel size
Display method
Drive method
Pixels
327 x 135 x 307 mm (12-7/8
”
x5-5/16
”
x12-3/32
”
)*
4
Approx. 3.1 kg (6.83 lbs.)*
5
Power cord, power cord secure lock, wireless remote control, batteries for remote control (AAA type x2), VGA cable, Application software (CD-ROM), safety wire rope
Full color (16,777,216 colors)
10:-0.5 (fixed)
220 W UHM lamp
2,800 lumens*
2
Vertical: ±10°
85%*
2
500:1 (full on/full off)*
2
1,024 x 768*
3
Horizontal: 15-91 kHz, Vertical: 50-85 Hz
Fixed, manual focus, F 1.80, f 6.74 mm
1.52-2.79m (60-110 inches) (4:3 aspect ratio)
NTSC, NTSC4.43, PAL-M, PAL60: f
H
15.75 kHz; f
V
60 Hz
PAL, SECAM, PAL-N: f
H
15.63 kHz; f
V
50 Hz
Front/rear, ceiling/desk (menu selection)
4cm-2cm (1-1/16
”
-25/32
”
) (oval) x 1
D-sub HD 15-pin x 1 (RGB/YP
B
P
R
/YC
B
C
R
x 1)
D-sub HD 15-pin x 1 (RGB/YP
B
P
R
/YC
B
C
R
x 1)
RCA pin x 1 (Composite video x 1)
Mini DIN 4-pin x 1 (S-Video x 1)
M3 x 2 (L-R x 2)
M3 x 1 (L-R x 1)
D-sub 9-pin x 1 (RS-232C)
RJ-45 x 1, compatible with PJLink™ (class 1), 100BASE-TX/10BASE-T
Moulded plastic (PC+ABS)
Temperature: 0°-40°C (32°-104°F)*
6
, Humidity: 20%-80% (no condensation)
Model
Color
Keystone correction range
Specifications
(The specifications and design are subject to change without notice as product development proceeds.)
*1: In eco standby mode, network functions such as Standby On via LAN are not available, and only certain commands can be received from RS-232C control.
*2: Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3: Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.
*4: Protruding parts not included.
*5: Average value (excluding lens cap). May differ depending on models.
*6: The operating temperature range is 0°C (32°F) to 35°C (95°F) when used in High-Altitude mode (1,400 to 2,700 m (4,593 to 8,858 feet)).
Also, in Lamp Normal mode, if the ambient temperature exceeds 35°C/95°F (30°C/85°F in High-Altitude mode), the light output may be reduced approximately 30% to protect the projector.
PT-ST10U
307(12-3/32)
unit : mm (inch)
124(4-7/8)
135(5-5/16)
327(12-7/8)
80
(3-5/32)
100-240 V AC, 50/60 Hz
300W (0.4 W*
1
in eco standby mode. 15 W in normal standby mode. 18 W in normal standby mode when set to audio monitor out and with fan stopped.)
Dichroic mirror separation/prism synthesis system
16 mm (0.63
”
) diagonal, 4:3 aspect ratio
Transparent LCD panel (x 3, R/G/B)
Active matrix
786,432 pixels (1,024 x 768) x 3 panels
Project size
(diagonal)
Projection distance (L)
0.60 m (1.97´)
0.71 m (2.33´)
0.82 m (2.69´)
0.92 m (3.02´)
1.03 m (3.38´)
1.14 m (3.74´)
Height from the edge of
screen to center of lens (H)
-0.05 m (-0.5´)
-0.05 m (-0.6´)
-0.06 m (-0.7´)
-0.07 m (-0.8´)
-0.08 m (-0.8´)
-0.08 m (-0.9´)
PT-ST10U (Screen aspect ratio = 4:3)
1.52 m (60´´ )
1.78 m (70´´ )
2.03 m (80´´ )
2.29 m (90´´ )
2.54 m (100´´ )
2.79 m (110´´ )
Weights and dimensions shown are approximations. Specifications are subject to change without notice. This product may be subject to export
control regulations. All trademarks are the property of their respective trademark owners. Projection images simulated.
480i(525i): fH 15.75 kHz; fV 60 Hz
576i(625i): fH 15.63 kHz; fV 50 Hz
480p(525p): fH 31.50 kHz; fV 60 Hz
576p(625p): fH 31.25 kHz; fV 50 Hz
720(750)/60p: fH 45.00 kHz; fV 60 Hz
720(750)/50p: fH 37.50 kHz; fV 50 Hz
1080(1125)/60i: fH 33.75 kHz; fV 60 Hz
1080(1125)/50i: fH 28.13 kHz; fV 50 Hz
1080(1125)/60p: fH 67.50 kHz; fv 60 Hz
1080(1125)/50p: fH 56.25 kHz; fv 50 Hz
L
H
H
L
Upper edge of screen image
screen image
Lower edge of screen image
LCD panel
Terminals
Scanning
frequency
®
Optical system
Power consumption
Summary of Contents for PT-ST10U
Page 1: ......