Standard setting-up position (If using the ET-DLE030)
C a u t i o n :
•
All construction work should be done by a qualified technician.
•
When mounting to the ceiling, use the special mounting bracket. Furthermore, in order to prevent it from falling
down from the ceiling, use the supplied wire on the mounting bracket.
unit : mm (inch)
NOTE:
Illustrations show the projector
installed using optional ceiling mount
bracket ET-PKD130H, optional bracket
assembly ET-PKD130B and an optional lens.
This illustration is not drawn to scale.
*1 When the lens protrudes to the maximum.
84 mm (3-5/16 in) with the ET-DLE085
43 mm (1-11/16 in) with the supplied lens
44 mm (1-23/32 in) with the ET-DLE150
27 mm (1-1/16 in) with the ET-DLE055
*2 Adjustable in 40 mm (1-9/16 in) steps.
45 mm (1-25/32 in) with the ET-DLE250
51mm (2 in) with the ET-DLE350
95
mm (3-3/4 in) with the ET-DLE450
100
(3-15/16)
380
(14-31/32)
308
(12-1/8)
100
(3-15/16)
Upper edge of
projected image
A1
A2
238.5
(9-3/8)
299.5
(11-25/32)
L1
L4
L3
ø60.5
5
46〜
706
*
2
(21-1/2
–
27-25/32)
Projected image
Lower edge of
projected image
A1
A2
L1
L4
L3
Projected image
PT-
RZ670B
/
RZ670W
/
RZ670LB
/
RZ670LW
DLP
TM
Projector
As of September 2014
1 0 / 1 8
SFD14M021
