Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 81
[INITIALIZE]
Return various setting values to their factory default settings.
1)
Press
as
to select [INITIALIZE].
2)
Press the <ENTER> button.
f
The
[SECURITY PASSWORD]
screen is displayed.
3)
Enter a security password and press the <ENTER> button.
f
The
[INITIALIZE]
screen is displayed.
4)
Press
as
to select an item to initialize.
[ALL USER DATA]
Returns all setting items including [ENTRY SIGNAL], [NETWORK SETUP], [E-mail set up], and [USER
LOGO] to factory default values.
The projector will go into the standby status to reflect the setting values.
[ENTRY SIGNAL]
Deletes all the setting values saved for each input signal.
To delete only a part of a registered signal, perform the procedure described in “Deleting the
registered data” (
x
page 84).
[NETWORK/E-MAIL]
Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.
[LOGO IMAGE]
Deletes the image registered in [USER LOGO].
5)
Press the <ENTER> button.
6)
When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button.
[SERVICE PASSWORD]
Used by a service person.