Setting
38
- ENGLISH
Settings
Remote ID
When you use the system with multiple projectors,
you can operate all the projectors simultaneously or
each projector individually using single remote control,
if a unique ID number is assigned to each projector.
There are 7 different remote control IDs: [All],
[ID1]~[ID6].
Press ▲▼ to select [Remote ID].
1 )
Press ►
to display the setting dialog
2 )
box.
Press ◄► to select the desired item.
3 )
Attention
When operating the projector under [All] code, you can
z
operate several projectors at the same time.
If you want to control the projector with a specified
z
remote control ID, make sure the remote control ID on
the remote control fit to the remote control ID on the
projector. (
Æ
page 18)
Startup Logo
Set this function to display the Panasonic logo when
the projector is turning on.
Press ▲▼ to select [Startup Logo].
1 )
Press ►
to display the setting dialog
2 )
box.
Press ◄► to switch [On]/[Off].
3 )
On
The logo will display when
the
projector is turning on.
Off
The logo will not display when
the
projector is turning on.
Reset
Return all data that has been set in the
menu to the
factory defaults.
Press ▲▼ to select [Reset].
1 )
Press ►
to display the setting dialog
2 )
box.
Press ▲▼ to select [Yes].
3 )
Press ► to execute.
4 )
Note
Lamp used time has been set by user in the [Security]
z
menu will not be reset.
