Panasonic PT-LW373 Operating Instructions (Functional Manual) Download Page 19

Page: 19 / 114

ENGLISH - 19

Contents of the supplied CD-ROM

The contents of the supplied CD-ROM are as follow.

Instruction/list (PDF)

Operating Instructions
Operating Instructions – Multi Monitoring & Control Software
Operating Instructions – Presenter Light Software

List of Compatible Device Models

This is a list of projectors that are com-

patible with the Multi Monitoring & Con-

trol Software and its restrictions.

Software license

The license condition for the open

source software used in the projector is

contained as a PDF file.

Software

Multi Monitoring & Control Software

(Windows)

This software allows you to monitor and

control multiple displays (projector or flat

panel display) connected to the LAN.

- The Multi Monitoring & Control Software and Presenter Light Software are only for PT-LW373, PT-LW333, PT-LB423,

PT-LB383 and PT-LB353.

Note

The “List of Compatible Device Models” for the flat panel display compatible with the “Multi Monitoring & Control

Software” can be downloaded from the Panasonic website (https://panasonic.net/cns/prodisplays/).

Optional accessories

Options

Model No.

Ceiling Mount Bracket

ET-PKL100H (for high ceilings)

ET-PKL100S (for low ceilings)
ET-PKL420B (Projector Mount Bracket)

Replacement Lamp Unit

ET-LAL500

Replacement Filter Unit

ET-RFL300

D-SUB - S Video conversion cable

ET-ADSV

Wireless Module

ET-WML100E / ET-WML100U

- The Wireless Module is only for PT-LW373, PT-LW333, PT-LB423, PT-LB383 and PT-LB353.

*1 In this document, the alphabet letters at the end of the model numbers are omitted.

Note

The model numbers of optional accessories are subject to change without prior notice.

Chapter 1 Preparation - Precautions for use

Summary of Contents for PT-LW373



















































































































Search results

Summary of Contents for PT-LW373

Reviews:

Brands by name

Popular brands

Panasonic PT-LW373, Operating Instructions (Functional Manual)

Search results

Summary of Contents for PT-LW373

Reviews:

Brands by name

Popular brands